CROSS FADER |
![]() |
TCF-45L Series |
Direct print resistor element used (Special surface treatment). Low profile design. Durable system which adopted the shaft of the high quality. Connector terminal style. |
Last update: 2022.11.09. | [Electrical-spec] | [Mechanical-spec] | [Note] | [Dimensions] | [Model-number] | EU-RoHS |
Information |
UNDER DEVELOPMENT Samples can be produced (it takes time). |
Electrical specifications | TCF-45L Series |
Products | TCF-45L-B* |
Number of circuits Type of output laws |
1 Linear taper |
Circuit method | Potentiometer circuit |
Total resistance (3-1) | 10kohm, 50kohm |
Total resistance tolerance | ±20% |
Linearity | ±5% |
Residual resistance (2-1), (2-3) | 5ohm or less |
Voltage proof | 1 Min. at AC100V |
Insulation resistance | 50Mohm or more at DC250V |
Max rating | DC20V (0.1W) |
Sliding noise level | 47mV or less (by JIS C 6443) |
Sliding life | 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV) |
Connector (3pin) | S3B-PH (PH Series: J.S.T.MFG.CO.,LTD.) |
Mechanical specifications | TCF-45L Series |
Travel (Stroke) length | 45mm ±0.5mm |
Operating force | 0 to 0.2N |
Stopper strength | 40N |
Push-pull strangth | 30N |
Alignment to the center | ±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface) |
General specifications | TCF-45L Series |
Temperature range | -10 to +60 degrees C (Operating), -15 to +65 degrees C (Storage) |
Relative humidity | 80%RH (No condensation) |
Note |
* Move to one end in Control-bar on the occasion of knob wearing, and can break into it slowly. |
Dimensions - TCF-45L-B* |
![]() |
Dimensions - Terminations / Output law |
![]() |
Model number | ||||||||
|
*1 | Product number | TCF-45L : TCF-45L Series |
*2 | Output law | B : Linear taper |
*3 |
Total resistance |
10K : 10kohm 50K : 50kohm |
Products No. ( X: Standerd model) |
Travel | Output law | Resistance | Terminal style | |
TCF-45L-B10K | X | 45mm | Linear | 10kohm | Connector |
TCF-45L-B50K | X | 45mm | Linear | 50kohm | Connector |
Update list | |
2022.11.09. | First edition |