English   Japanese   
TOP         PRODUCTS         TECHNOLOGY         DISTRIBUTORS         PRODUCT STATUS
||||| VARIABLE ATTENUATOR |||||

Variable attenuator + Snap action switch
2CP2531WS Series
EU-RoHS compliant products
Please see datasheet >>
Applications Audio equipment
Features Let's lose power switch from an operation panel.
Conductive plastic resistor element used
Rotary angle 315 degrees
With snap action switch
Circuit Ladder circuit ......................Caution!! (Curve) >>
Impedance 10kohm, 50kohm, 100kohm
Operating angle 300 degrees + 15 degrees(switch)
Size Please see datasheet
Order number
Circuits
(channels)		 Operating
angle		 Impedance
 		 Circut
method		 Mechanical
click		 Control-shaft
Diameter x Length		 Products No.
Two 315 degrees 50kohm Ladder Cut off position 6mm x 20mm 2CP2531-50K
Two 315 degrees 100kohm Ladder Cut off position 6mm x 20mm 2CP2531-100K
Two 315 degrees 10kohm Ladder Cut off position 6mm x 20mm 2CP2531-10K
Note on using ladder
circuits


Variable attenuator
CP600 Series
EU-RoHS compliant products
Please see datasheet >>
Applications Audio equipment
Features Conductive plastic resistor element used.
Circuit Ladder circuit ......................Caution!! (Curve) >>
Impedance 5kohm, 10kohm, 50kohm, 100kohm
Operating angle 300 degrees
Size Please see datasheet
Order example
Circuits
(channels)		 Operating
angle		 Impedance
 		 Circut
method		 Mechanical
click		 Control-shaft
Diameter x Length		 Products No.
One 300 degrees 10kohm Ladder Without 6mm x 20mm CP601 - 10K
Two 300 degrees 50kohm Ladder 15degrees step 6mm x 20mm 2CP601S - 50K
Three 300 degrees 100kohm Ladder Without 6mm x 20mm 3CP601 - 100K
Four 300 degrees 10kohm Ladder Center 6mm x 20mm 4CP601C - 10K
Five 300 degrees 100kohm Ladder 15degrees step 6mm x 20mm 5CP601S - 100K
Six 300 degrees 50kohm Ladder Without 6mm x 20mm 6CP601 - 50K
Custom order example [ How to specify different "output law" in multiple circuits ]
*The number in front of "CP601" is the total number of circuits.
*The first "output law" specified in the beginning will be the knob side.
*Consecutive cases of the same "output law" are combined into one.  ( A10K / A10K >> 2-A10K )
* Taper-A and Taper-B and Taper-C: Please see "Potentiometer CP601 Series".
*If the total resistance is different, specify it separately.

Example Number of
total circuits		 Circuits Circuit position Products No.
1 4 circuits Ladder 10kohm x2
Taper-B 10kohm x2		 top (knob side)
bottom 		4CP601 - 2-10K / 2-B10K
2 3 circuits Taper-B 10kohm x1
Ladder 10kohm x2		 top (knob side)
bottom 		3CP601 - B10K / 2-10K
3 3 circuits Ladder 10kohm x1
Taper-A 10kohm x1
Taper-B 10kohm x1		 top (knob side)
center
bottom 		3CP601 - 10K / A10K / B10K
4 5 circuits Ladder 10kohm x4
Taper-B 10kohm x1		 top (knob side)
bottom 		5CP601 - 4-10K / B10K
5 4 circuits Ladder 10kohm x2
Ladder 5kohm x2		 top (knob side)
bottom 		4CP601 - 2-10K / 2-5K
6 4 circuits Ladder 5kohm x2
Taper-A 10kohm x1
Taper-C 10kohm x1		 top (knob side)
center
bottom 		4CP601 - 2-5K / A10K / C10K
Note on using ladder
circuits