English   Japanese   
TOP         PRODUCTS         TECHNOLOGY         DISTRIBUTORS         PRODUCT STATUS
     VARIABLE POTENTIOMETERR

CP2500 Series
Conductive plastic resistor element used (Low rotational noise).
25mm squoutput-law body.
300 degree operating angle.
Highly dustproof.
Maximum number of interlocking circuits: 8
Last update: 2023.03.22. [Electrical-spec] [Mechanical-spec] [Note] [Dimensions] [Model-number] EU-RoHS


Information
 


Electrical specifications CP2500 Series
Products *CP2508*-A* *CP2500*-B* *CP2500*-C*
Circuit method Potentiometer circuit
Total resistance (1-C) 5kohm,   10kohm,   50kohm,   100kohm
Total resistance tolerance ±20%
Taper tolerance (150 degs) 10 - 25% 40 - 60% 10 - 25%
Residual resistance
 		 Terminal 2 to C : 1% or 100ohm
Terminal 1 to 2 : 1%		 Terminal 1 to 2 : 1% or 100ohm
Terminal 2 to C : 1% or 100ohm		 Terminal 1 to 2 : 1% or 100ohm
Terminal 2 to C : 1%
Matching accuracy (150 degs) 3dB Max.
Voltage proof 1 Min. at AC500V
Insulation resistance 50Mohm or more at DC500V
Max rating DC20V (0.1W)
Sliding noise level 47mV or less (by JIS C 6443)
Sliding life 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical specifications CP2500 Series
Operating angle 300 degrees ±5 degrees
Rotational torque 0.1 to 1.5Ncm (Different by number of circuit)
Strength Nut-Attached 50Ncm
Attached parts Hexagonal nut (M9)
Stopper strength 50Ncm
Push-pull strangth 50N

General specifications CP2500 Series
Temperature range -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity 90%RH (No condensation)

Note
* Solder heat resistance: 350deg C max, 5sec max, 2 times. (Manual soldering only)
* Special order of the shaft length is possible. Please contact us for details.
* It is highly recommended that the fault tolerant system is to be set up in the big situation like the live broadcast.
* Replacing it from other brands tests it enough, and please consider.
* Terminal numbers output-law '1', '2', and 'C', not '3', '2', and '1'.

Dimensions - CP2500*-*
CP2500 2CP2500 3CP2500 4CP2500
5CP2500 6CP2500 7CP2500 8CP2500

Dimensions - Terminations

Dimensions - Output law (Tapaer-A / Taper-B / Taper-C)


Model number
2 CP2500 S - B 10K
*1 *2 *3   *4 *5


*1
 		 Number of circuits
 		 Blank : Single circuit
2 to 8  : Number of circuits specified
*2
 		 Product number
 		 CP2500 : CP2500 Series (Taper-B, Taper-C)
CP2508 : CP2500 Series (Taper-A)
*3

 		 Mechanical click option

 		 Blank : Without click
S         : With click (15degrees step)
C         : Center click
*4

 		 Output law (Taper)

 		 B : Taper-B
A : Taper-A
C : TAper-C
*5


 		 Total resistance


 		 5K     : 5kohm
10K   : 10kohm
50K   : 50kohm
100K : 100kohm


Products No.
( X: Standerd model)		 Number of circuits Output law Resistance Click Shaft diameter x Shaft length
CP2500-B5K X 1 Taper-B 5kohm Without Φ6 x 20mm
CP2500-B10K X 1 Taper-B 10kohm Without Φ6 x 20mm
CP2500-B50K X 1 Taper-B 50kohm Without Φ6 x 20mm
CP2500-B100K X 1 Taper-B 100kohm Without Φ6 x 20mm
CP2500S-B5K X 1 Taper-B 5kohm With Φ6 x 20mm
CP2500S-B10K X 1 Taper-B 10kohm With Φ6 x 20mm
CP2500S-B50K X 1 Taper-B 50kohm With Φ6 x 20mm
CP2500S-B100K X 1 Taper-B 100kohm With Φ6 x 20mm
CP2500C-B5K    1 Taper-B 5kohm Center Φ6 x 20mm
CP2500C-B10K    1 Taper-B 10kohm Center Φ6 x 20mm
CP2500C-B50K    1 Taper-B 50kohm Center Φ6 x 20mm
CP2500C-B100K    1 Taper-B 100kohm Center Φ6 x 20mm
2CP2500-B5K X 2 Taper-B 5kohm Without Φ6 x 20mm
2CP2500-B10K X 2 Taper-B 10kohm Without Φ6 x 20mm
2CP2500-B50K X 2 Taper-B 50kohm Without Φ6 x 20mm
2CP2500-B100K X 2 Taper-B 100kohm Without Φ6 x 20mm
2CP2500S-B5K X 2 Taper-B 5kohm With Φ6 x 20mm
2CP2500S-B10K X 2 Taper-B 10kohm With Φ6 x 20mm
2CP2500S-B50K X 2 Taper-B 50kohm With Φ6 x 20mm
2CP2500S-B100K X 2 Taper-B 100kohm With Φ6 x 20mm
2CP2500C-B5K    2  Taper-B 5kohm Center Φ6 x 20mm
2CP2500C-B10K    2 Taper-B 10kohm Center Φ6 x 20mm
2CP2500C-B50K    2 Taper-B 50kohm Center Φ6 x 20mm
2CP2500C-B100K    2 Taper-B 100kohm Center Φ6 x 20mm
3CP2500-B5K X 3 Taper-B 5kohm Without Φ6 x 20mm
3CP2500-B10K X 3 Taper-B 10kohm Without Φ6 x 20mm
3CP2500-B50K X 3 Taper-B 50kohm Without Φ6 x 20mm
3CP2500-B100K X 3 Taper-B 100kohm Without Φ6 x 20mm
3CP2500S-B5K X 3 Taper-B 5kohm With Φ6 x 20mm
3CP2500S-B10K X 3 Taper-B 10kohm With Φ6 x 20mm
3CP2500S-B50K X 3 Taper-B 50kohm With Φ6 x 20mm
3CP2500S-B100K X 3 Taper-B 100kohm With Φ6 x 20mm
3CP2500C-B5K    3 Taper-B 5kohm Center Φ6 x 20mm
3CP2500C-B10K    3 Taper-B 10kohm Center Φ6 x 20mm
3CP2500C-B50K    3 Taper-B 50kohm Center Φ6 x 20mm
3CP2500C-B100K    3 Taper-B 100kohm Center Φ6 x 20mm
4CP2500-B5K X 4 Taper-B 5kohm Without Φ6 x 20mm
4CP2500-B10K X 4 Taper-B 10kohm Without Φ6 x 20mm
4CP2500-B50K X 4 Taper-B 50kohm Without Φ6 x 20mm
4CP2500-B100K X 4 Taper-B 100kohm Without Φ6 x 20mm
4CP2500S-B5K X 4 Taper-B 5kohm With Φ6 x 20mm
4CP2500S-B10K X 4 Taper-B 10kohm With Φ6 x 20mm
4CP2500S-B50K X 4 Taper-B 50kohm With Φ6 x 20mm
4CP2500S-B100K X 4 Taper-B 100kohm With Φ6 x 20mm
4CP2500C-B5K    4 Taper-B 5kohm Center Φ6 x 20mm
4CP2500C-B10K    4 Taper-B 10kohm Center Φ6 x 20mm
4CP2500C-B50K    4 Taper-B 50kohm Center Φ6 x 20mm
4CP2500C-B100K    4 Taper-B 100kohm Center Φ6 x 20mm
5CP2500-B5K   5 Taper-B 5kohm Without Φ6 x 20mm
5CP2500-B10K   5 Taper-B 10kohm Without Φ6 x 20mm
5CP2500-B50K   5 Taper-B 50kohm Without Φ6 x 20mm
5CP2500-B100K   5 Taper-B 100kohm Without Φ6 x 20mm
5CP2500S-B5K   5 Taper-B 5kohm With Φ6 x 20mm
5CP2500S-B10K   5 Taper-B 10kohm With Φ6 x 20mm
5CP2500S-B50K   5 Taper-B 50kohm With Φ6 x 20mm
5CP2500S-B100K   5 Taper-B 100kohm With Φ6 x 20mm
5CP2500C-B5K    5 Taper-B 5kohm Center Φ6 x 20mm
5CP2500C-B10K    5 Taper-B 10kohm Center Φ6 x 20mm
5CP2500C-B50K    5 Taper-B 50kohm Center Φ6 x 20mm
5CP2500C-B100K    5 Taper-B 100kohm Center Φ6 x 20mm
6CP2500-B5K   6 Taper-B 5kohm Without Φ6 x 20mm
6CP2500-B10K   6 Taper-B 10kohm Without Φ6 x 20mm
6CP2500-B50K   6 Taper-B 50kohm Without Φ6 x 20mm
6CP2500-B100K   6 Taper-B 100kohm Without Φ6 x 20mm
6CP2500S-B5K   6 Taper-B 5kohm With Φ6 x 20mm
6CP2500S-B10K   6 Taper-B 10kohm With Φ6 x 20mm
6CP2500S-B50K   6 Taper-B 50kohm With Φ6 x 20mm
6CP2500S-B100K   6 Taper-B 100kohm With Φ6 x 20mm
6CP2500C-B5K    6 Taper-B 5kohm Center Φ6 x 20mm
6CP2500C-B10K    6 Taper-B 10kohm Center Φ6 x 20mm
6CP2500C-B50K    6 Taper-B 50kohm Center Φ6 x 20mm
6CP2500C-B100K    6 Taper-B 100kohm Center Φ6 x 20mm
7CP2500-B5K   7 Taper-B 5kohm Without Φ6 x 20mm
7CP2500-B10K   7 Taper-B 10kohm Without Φ6 x 20mm
7CP2500-B50K   7 Taper-B 50kohm Without Φ6 x 20mm
7CP2500-B100K   7 Taper-B 100kohm Without Φ6 x 20mm
7CP2500S-B5K   7 Taper-B 5kohm With Φ6 x 20mm
7CP2500S-B10K   7 Taper-B 10kohm With Φ6 x 20mm
7CP2500S-B50K   7 Taper-B 50kohm With Φ6 x 20mm
7CP2500S-B100K   7 Taper-B 100kohm With Φ6 x 20mm
7CP2500C-B5K    7 Taper-B 5kohm Center Φ6 x 20mm
7CP2500C-B10K    7 Taper-B 10kohm Center Φ6 x 20mm
7CP2500C-B50K    7 Taper-B 50kohm Center Φ6 x 20mm
7CP2500C-B100K    7 Taper-B 100kohm Center Φ6 x 20mm
8CP2500-B5K   8 Taper-B 5kohm Without Φ6 x 20mm
8CP2500-B10K   8 Taper-B 10kohm Without Φ6 x 20mm
8CP2500-B50K   8 Taper-B 50kohm Without Φ6 x 20mm
8CP2500-B100K   8 Taper-B 100kohm Without Φ6 x 20mm
8CP2500S-B5K   8 Taper-B 5kohm With Φ6 x 20mm
8CP2500S-B10K   8 Taper-B 10kohm With Φ6 x 20mm
8CP2500S-B50K   8 Taper-B 50kohm With Φ6 x 20mm
8CP2500S-B100K   8 Taper-B 100kohm With Φ6 x 20mm
8CP2500C-B5K    8 Taper-B 5kohm Center Φ6 x 20mm
8CP2500C-B10K    8 Taper-B 10kohm Center Φ6 x 20mm
8CP2500C-B50K    8 Taper-B 50kohm Center Φ6 x 20mm
8CP2500C-B100K    8 Taper-B 100kohm Center Φ6 x 20mm
CP2508-A5K X 1 Taper-A 5kohm Without Φ6 x 20mm
CP2508-A10K X 1 Taper-A 10kohm Without Φ6 x 20mm
CP2508-A50K X 1 Taper-A 50kohm Without Φ6 x 20mm
CP2508-A100K X 1 Taper-A 100kohm Without Φ6 x 20mm
CP2508S-A5K X 1 Taper-A 5kohm With Φ6 x 20mm
CP2508S-A10K X 1 Taper-A 10kohm With Φ6 x 20mm
CP2508S-A50K X 1 Taper-A 50kohm With Φ6 x 20mm
CP2508S-A100K X 1 Taper-A 100kohm With Φ6 x 20mm
CP2508C-A5K    1 Taper-A 5kohm Center Φ6 x 20mm
CP2508C-A10K    1 Taper-A 10kohm Center Φ6 x 20mm
CP2508C-A50K    1 Taper-A 50kohm Center Φ6 x 20mm
CP2508C-A100K    1 Taper-A 100kohm Center Φ6 x 20mm
2CP2508-A5K X 2 Taper-A 5kohm Without Φ6 x 20mm
2CP2508-A10K X 2 Taper-A 10kohm Without Φ6 x 20mm
2CP2508-A50K X 2 Taper-A 50kohm Without Φ6 x 20mm
2CP2508-A100K X 2 Taper-A 100kohm Without Φ6 x 20mm
2CP2508S-A5K X 2 Taper-A 5kohm With Φ6 x 20mm
2CP2508S-A10K X 2 Taper-A 10kohm With Φ6 x 20mm
2CP2508S-A50K X 2 Taper-A 50kohm With Φ6 x 20mm
2CP2508S-A100K X 2 Taper-A 100kohm With Φ6 x 20mm
2CP2508C-A5K    2  Taper-A 5kohm Center Φ6 x 20mm
2CP2508C-A10K    2 Taper-A 10kohm Center Φ6 x 20mm
2CP2508C-A50K    2 Taper-A 50kohm Center Φ6 x 20mm
2CP2508C-A100K    2 Taper-A 100kohm Center Φ6 x 20mm
3CP2508-A5K X 3 Taper-A 5kohm Without Φ6 x 20mm
3CP2508-A10K X 3 Taper-A 10kohm Without Φ6 x 20mm
3CP2508-A50K X 3 Taper-A 50kohm Without Φ6 x 20mm
3CP2508-A100K X 3 Taper-A 100kohm Without Φ6 x 20mm
3CP2508S-A5K X 3 Taper-A 5kohm With Φ6 x 20mm
3CP2508S-A10K X 3 Taper-A 10kohm With Φ6 x 20mm
3CP2508S-A50K X 3 Taper-A 50kohm With Φ6 x 20mm
3CP2508S-A100K X 3 Taper-A 100kohm With Φ6 x 20mm
3CP2508C-A5K    3 Taper-A 5kohm Center Φ6 x 20mm
3CP2508C-A10K    3 Taper-A 10kohm Center Φ6 x 20mm
3CP2508C-A50K    3 Taper-A 50kohm Center Φ6 x 20mm
3CP2508C-A100K    3 Taper-A 100kohm Center Φ6 x 20mm
4CP2508-A5K X 4 Taper-A 5kohm Without Φ6 x 20mm
4CP2508-A10K X 4 Taper-A 10kohm Without Φ6 x 20mm
4CP2508-A50K X 4 Taper-A 50kohm Without Φ6 x 20mm
4CP2508-A100K X 4 Taper-A 100kohm Without Φ6 x 20mm
4CP2508S-A5K X 4 Taper-A 5kohm With Φ6 x 20mm
4CP2508S-A10K X 4 Taper-A 10kohm With Φ6 x 20mm
4CP2508S-A50K X 4 Taper-A 50kohm With Φ6 x 20mm
4CP2508S-A100K X 4 Taper-A 100kohm With Φ6 x 20mm
4CP2508C-A5K    4 Taper-A 5kohm Center Φ6 x 20mm
4CP2508C-A10K    4 Taper-A 10kohm Center Φ6 x 20mm
4CP2508C-A50K    4 Taper-A 50kohm Center Φ6 x 20mm
4CP2508C-A100K    4 Taper-A 100kohm Center Φ6 x 20mm
5CP2508-A5K   5 Taper-A 5kohm Without Φ6 x 20mm
5CP2508-A10K   5 Taper-A 10kohm Without Φ6 x 20mm
5CP2508-A50K   5 Taper-A 50kohm Without Φ6 x 20mm
5CP2508-A100K   5 Taper-A 100kohm Without Φ6 x 20mm
5CP2508S-A5K   5 Taper-A 5kohm With Φ6 x 20mm
5CP2508S-A10K   5 Taper-A 10kohm With Φ6 x 20mm
5CP2508S-A50K   5 Taper-A 50kohm With Φ6 x 20mm
5CP2508S-A100K   5 Taper-A 100kohm With Φ6 x 20mm
5CP2508C-A5K    5 Taper-A 5kohm Center Φ6 x 20mm
5CP2508C-A10K    5 Taper-A 10kohm Center Φ6 x 20mm
5CP2508C-A50K    5 Taper-A 50kohm Center Φ6 x 20mm
5CP2508C-A100K    5 Taper-A 100kohm Center Φ6 x 20mm
6CP2508-A5K   6 Taper-A 5kohm Without Φ6 x 20mm
6CP2508-A10K   6 Taper-A 10kohm Without Φ6 x 20mm
6CP2508-A50K   6 Taper-A 50kohm Without Φ6 x 20mm
6CP2508-A100K   6 Taper-A 100kohm Without Φ6 x 20mm
6CP2508S-A5K   6 Taper-A 5kohm With Φ6 x 20mm
6CP2508S-A10K   6 Taper-A 10kohm With Φ6 x 20mm
6CP2508S-A50K   6 Taper-A 50kohm With Φ6 x 20mm
6CP2508S-A100K   6 Taper-A 100kohm With Φ6 x 20mm
6CP2508C-A5K    6 Taper-A 5kohm Center Φ6 x 20mm
6CP2508C-A10K    6 Taper-A 10kohm Center Φ6 x 20mm
6CP2508C-A50K    6 Taper-A 50kohm Center Φ6 x 20mm
6CP2508C-A100K    6 Taper-A 100kohm Center Φ6 x 20mm
7CP2508-A5K   7 Taper-A 5kohm Without Φ6 x 20mm
7CP2508-A10K   7 Taper-A 10kohm Without Φ6 x 20mm
7CP2508-A50K   7 Taper-A 50kohm Without Φ6 x 20mm
7CP2508-A100K   7 Taper-A 100kohm Without Φ6 x 20mm
7CP2508S-A5K   7 Taper-A 5kohm With Φ6 x 20mm
7CP2508S-A10K   7 Taper-A 10kohm With Φ6 x 20mm
7CP2508S-A50K   7 Taper-A 50kohm With Φ6 x 20mm
7CP2508S-A100K   7 Taper-A 100kohm With Φ6 x 20mm
7CP2508C-A5K    7 Taper-A 5kohm Center Φ6 x 20mm
7CP2508C-A10K    7 Taper-A 10kohm Center Φ6 x 20mm
7CP2508C-A50K    7 Taper-A 50kohm Center Φ6 x 20mm
7CP2508C-A100K    7 Taper-A 100kohm Center Φ6 x 20mm
8CP2508-A5K   8 Taper-A 5kohm Without Φ6 x 20mm
8CP2508-A10K   8 Taper-A 10kohm Without Φ6 x 20mm
8CP2508-A50K   8 Taper-A 50kohm Without Φ6 x 20mm
8CP2508-A100K   8 Taper-A 100kohm Without Φ6 x 20mm
8CP2508S-A5K   8 Taper-A 5kohm With Φ6 x 20mm
8CP2508S-A10K   8 Taper-A 10kohm With Φ6 x 20mm
8CP2508S-A50K   8 Taper-A 50kohm With Φ6 x 20mm
8CP2508S-A100K   8 Taper-A 100kohm With Φ6 x 20mm
8CP2508C-A5K    8 Taper-A 5kohm Center Φ6 x 20mm
8CP2508C-A10K    8 Taper-A 10kohm Center Φ6 x 20mm
8CP2508C-A50K    8 Taper-A 50kohm Center Φ6 x 20mm
8CP2508C-A100K    8 Taper-A 100kohm Center Φ6 x 20mm
CP2500-C5K X 1 Taper-C 5kohm Without Φ6 x 20mm
CP2500-C10K X 1 Taper-C 10kohm Without Φ6 x 20mm
CP2500-C50K X 1 Taper-C 50kohm Without Φ6 x 20mm
CP2500-C100K X 1 Taper-C 100kohm Without Φ6 x 20mm
CP2500S-C5K X 1 Taper-C 5kohm With Φ6 x 20mm
CP2500S-C10K X 1 Taper-C 10kohm With Φ6 x 20mm
CP2500S-C50K X 1 Taper-C 50kohm With Φ6 x 20mm
CP2500S-C100K X 1 Taper-C 100kohm With Φ6 x 20mm
CP2500C-C5K    1 Taper-C 5kohm Center Φ6 x 20mm
CP2500C-C10K    1 Taper-C 10kohm Center Φ6 x 20mm
CP2500C-C50K    1 Taper-C 50kohm Center Φ6 x 20mm
CP2500C-C100K    1 Taper-C 100kohm Center Φ6 x 20mm
2CP2500-C5K X 2 Taper-C 5kohm Without Φ6 x 20mm
2CP2500-C10K X 2 Taper-C 10kohm Without Φ6 x 20mm
2CP2500-C50K X 2 Taper-C 50kohm Without Φ6 x 20mm
2CP2500-C100K X 2 Taper-C 100kohm Without Φ6 x 20mm
2CP2500S-C5K X 2 Taper-C 5kohm With Φ6 x 20mm
2CP2500S-C10K X 2 Taper-C 10kohm With Φ6 x 20mm
2CP2500S-C50K X 2 Taper-C 50kohm With Φ6 x 20mm
2CP2500S-C100K X 2 Taper-C 100kohm With Φ6 x 20mm
2CP2500C-C5K    2  Taper-C 5kohm Center Φ6 x 20mm
2CP2500C-C10K    2 Taper-C 10kohm Center Φ6 x 20mm
2CP2500C-C50K    2 Taper-C 50kohm Center Φ6 x 20mm
2CP2500C-C100K    2 Taper-C 100kohm Center Φ6 x 20mm
3CP2500-C5K X 3 Taper-C 5kohm Without Φ6 x 20mm
3CP2500-C10K X 3 Taper-C 10kohm Without Φ6 x 20mm
3CP2500-C50K X 3 Taper-C 50kohm Without Φ6 x 20mm
3CP2500-C100K X 3 Taper-C 100kohm Without Φ6 x 20mm
3CP2500S-C5K X 3 Taper-C 5kohm With Φ6 x 20mm
3CP2500S-C10K X 3 Taper-C 10kohm With Φ6 x 20mm
3CP2500S-C50K X 3 Taper-C 50kohm With Φ6 x 20mm
3CP2500S-C100K X 3 Taper-C 100kohm With Φ6 x 20mm
3CP2500C-C5K    3 Taper-C 5kohm Center Φ6 x 20mm
3CP2500C-C10K    3 Taper-C 10kohm Center Φ6 x 20mm
3CP2500C-C50K    3 Taper-C 50kohm Center Φ6 x 20mm
3CP2500C-C100K    3 Taper-C 100kohm Center Φ6 x 20mm
4CP2500-C5K X 4 Taper-C 5kohm Without Φ6 x 20mm
4CP2500-C10K X 4 Taper-C 10kohm Without Φ6 x 20mm
4CP2500-C50K X 4 Taper-C 50kohm Without Φ6 x 20mm
4CP2500-C100K X 4 Taper-C 100kohm Without Φ6 x 20mm
4CP2500S-C5K X 4 Taper-C 5kohm With Φ6 x 20mm
4CP2500S-C10K X 4 Taper-C 10kohm With Φ6 x 20mm
4CP2500S-C50K X 4 Taper-C 50kohm With Φ6 x 20mm
4CP2500S-C100K X 4 Taper-C 100kohm With Φ6 x 20mm
4CP2500C-C5K    4 Taper-C 5kohm Center Φ6 x 20mm
4CP2500C-C10K    4 Taper-C 10kohm Center Φ6 x 20mm
4CP2500C-C50K    4 Taper-C 50kohm Center Φ6 x 20mm
4CP2500C-C100K    4 Taper-C 100kohm Center Φ6 x 20mm
5CP2500-C5K   5 Taper-C 5kohm Without Φ6 x 20mm
5CP2500-C10K   5 Taper-C 10kohm Without Φ6 x 20mm
5CP2500-C50K   5 Taper-C 50kohm Without Φ6 x 20mm
5CP2500-C100K   5 Taper-C 100kohm Without Φ6 x 20mm
5CP2500S-C5K   5 Taper-C 5kohm With Φ6 x 20mm
5CP2500S-C10K   5 Taper-C 10kohm With Φ6 x 20mm
5CP2500S-C50K   5 Taper-C 50kohm With Φ6 x 20mm
5CP2500S-C100K   5 Taper-C 100kohm With Φ6 x 20mm
5CP2500C-C5K    5 Taper-C 5kohm Center Φ6 x 20mm
5CP2500C-C10K    5 Taper-C 10kohm Center Φ6 x 20mm
5CP2500C-C50K    5 Taper-C 50kohm Center Φ6 x 20mm
5CP2500C-C100K    5 Taper-C 100kohm Center Φ6 x 20mm
6CP2500-C5K   6 Taper-C 5kohm Without Φ6 x 20mm
6CP2500-C10K   6 Taper-C 10kohm Without Φ6 x 20mm
6CP2500-C50K   6 Taper-C 50kohm Without Φ6 x 20mm
6CP2500-C100K   6 Taper-C 100kohm Without Φ6 x 20mm
6CP2500S-C5K   6 Taper-C 5kohm With Φ6 x 20mm
6CP2500S-C10K   6 Taper-C 10kohm With Φ6 x 20mm
6CP2500S-C50K   6 Taper-C 50kohm With Φ6 x 20mm
6CP2500S-C100K   6 Taper-C 100kohm With Φ6 x 20mm
6CP2500C-C5K    6 Taper-C 5kohm Center Φ6 x 20mm
6CP2500C-C10K    6 Taper-C 10kohm Center Φ6 x 20mm
6CP2500C-C50K    6 Taper-C 50kohm Center Φ6 x 20mm
6CP2500C-C100K    6 Taper-C 100kohm Center Φ6 x 20mm
7CP2500-C5K   7 Taper-C 5kohm Without Φ6 x 20mm
7CP2500-C10K   7 Taper-C 10kohm Without Φ6 x 20mm
7CP2500-C50K   7 Taper-C 50kohm Without Φ6 x 20mm
7CP2500-C100K   7 Taper-C 100kohm Without Φ6 x 20mm
7CP2500S-C5K   7 Taper-C 5kohm With Φ6 x 20mm
7CP2500S-C10K   7 Taper-C 10kohm With Φ6 x 20mm
7CP2500S-C50K   7 Taper-C 50kohm With Φ6 x 20mm
7CP2500S-C100K   7 Taper-C 100kohm With Φ6 x 20mm
7CP2500C-C5K    7 Taper-C 5kohm Center Φ6 x 20mm
7CP2500C-C10K    7 Taper-C 10kohm Center Φ6 x 20mm
7CP2500C-C50K    7 Taper-C 50kohm Center Φ6 x 20mm
7CP2500C-C100K    7 Taper-C 100kohm Center Φ6 x 20mm
8CP2500-C5K   8 Taper-C 5kohm Without Φ6 x 20mm
8CP2500-C10K   8 Taper-C 10kohm Without Φ6 x 20mm
8CP2500-C50K   8 Taper-C 50kohm Without Φ6 x 20mm
8CP2500-C100K   8 Taper-C 100kohm Without Φ6 x 20mm
8CP2500S-C5K   8 Taper-C 5kohm With Φ6 x 20mm
8CP2500S-C10K   8 Taper-C 10kohm With Φ6 x 20mm
8CP2500S-C50K   8 Taper-C 50kohm With Φ6 x 20mm
8CP2500S-C100K   8 Taper-C 100kohm With Φ6 x 20mm
8CP2500C-C5K    8 Taper-C 5kohm Center Φ6 x 20mm
8CP2500C-C10K    8 Taper-C 10kohm Center Φ6 x 20mm
8CP2500C-C50K    8 Taper-C 50kohm Center Φ6 x 20mm
8CP2500C-C100K    8 Taper-C 100kohm Center Φ6 x 20mm


Custom model number
[ How to specify different output-law in multiple circuits ]
* The number in front of CP2500 is the total number of circuits.
* The first output-law specified in the beginning will be the knob side.
* Consecutive cases of the same output-law are combined into one. ( A10K / A10K >> 2-A10K )
* The model number of the Taper-A is CP2508, but if you want to mix it up, it will be CP2500.
* If the total resistance is different, specify it separately.
* Ladder: Please see Variable attenuator CP2500 Series.
  (The CP2511 Series cannot be mounted because the angle is different.)


[Please refer to the following]
Example Number of circuits Output law types Circuit position Model number for this specification.
1
 		 4 circuits
 		 Taper-A 10kohm x2
Taper-B 10kohm x2		 top (knob side)
bottom		 4CP2500 - 2-A10K / 2-B10K
 
2
 		 3 circuits
 		 Taper-B 10kohm x1
Taper-A 10kohm x2		 top (knob side)
bottom		 3CP2500 - B10K / 2-A10K
 
3

 		 3 circuits

 		 Taper-B 10kohm x1
Taper-A 10kohm x1
Taper-B 10kohm x1		 top (knob side)
center
bottom		 3CP2500 - B10K / A10K / B10K

 
4
 		 4 circuits
 		 Taper-A 10kohm x3
Taper-B 10kohm x1		 top (knob side)
bottom		 4CP2500 - 3-10K / B10K
 
5
 		 4 circuits
 		 Taper-A 10kohm x2
Taper-A 5kohm x2		 top (knob side)
bottom		 4CP2500 - 2-A10K / 2-A5K
 
6
 		 3 circuits
 		 Ladder 10kohm x2
Taper-B 10kohm x1		 top (knob side)
bottom		 4CP2500 - 2-10K / B10K
 




Update list
   
2023.03.22. Additional 3D data (step format).
2022.11.07. First edition