English   Japanese   


VP-502A Series
Conductive plastic resistor element used (Low slide noise).
20mm control-bar.
Slide switch (at both ends ON) is optional.

Last update: 2023.04.14. [Electrical-spec] [Mechanical-spec] [Note] [Dimensions] [Model-number] EU-RoHS


Electrical specifications VP-502A Series
Products VP-502A*-**
Number of circuits
Type of output laws
Linear taper
Circuit method Potentiometer circuit
Total resistance (1-C) 5kohm,   10kohm
Total resistance tolerance ±20%
Linearity ±5%
Residual resistance (1-2), (2-C) 30ohm or less
Voltage proof 1 Min. at AC500V
Insulation resistance 50Mohm or more at DC500V
Max rating 0.1W
Maximum input voltage DC30V or less
Rated Resistive Load - Switch DC30V 50mA
Sliding noise level 47mV or less (by JIS C 6443)
Sliding life 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical specifications VP502A Series
Operating angle 60 degrees ±1 degrees
Operating force 0.3 to 0.5N
Stopper strength 50N
Push-pull strength 50N

General specifications VP502A Series
Temperature range -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity 90%RH (No condensation)

* Solder heat resistance: 350deg C max, 5sec max, 2 times. (Manual soldering only)
* Please take care during soldering that the smoke from the solder does not flow inside a fader.
* If the flux sticks to a resistor board, it may cause a trouble with the fader.
* It is highly recommended that the fault tolerant system is to be set up in the big situation like the live broadcast.
* This product is designed on the assumption of the horizontal use.
* The enough operational testing is highly recommended for the slant or the vertical use to prevent the unexpected operation.
* Replacing it from other brands tests it enough, and please consider.

Dimensions - VP-502A*-**
VP-502A VP-502AW

Dimensions - Terminations

Model number
VP-502A W - B 10K
*1 *2   *3 *4

*1 Product number (Travel) VP-502A : VP-502A Series
Slide switch option
Blank : Without
W        : With
*3 Output law B        : Linear taper
Total resistance
10K : 10kohm
5K   : 5kohm

Products No.
( X: Standard model)
Output law Resistance Slide switch Control-bar length
VP-502A-B5K X Linear 5kohm Without 20mm
VP-502A-B10K X Linear 10kohm Without 20mm
VP-502AW-B5K   Linear 5kohm With 20mm
VP-502AW-B10K   Linear 10kohm With 20mm

Update list
2023.12.19. Addition of maximum input voltage specification.     Change in maximum ratings.
2023.04.14. Additional 3D data (step format).
2022.11.10. First edition