English   Japanese   
TOP         PRODUCTS         TECHNOLOGY         DISTRIBUTORS         PRODUCT STATUS

     VARIABLE POTENTIOMETER

CP600 Series
Conductive plastic resistor element used (Low rotational noise).
16mm square body.
300 degree operating angle.
Highly dustproof.
Maximum number of interlocking circuits: 6
Last update: 2024.03.18. [Specifications] [Note] [Dimensions] [Model-number] [Update list] EU-RoHS


Information
 


Electrical specifications
(initial value)
CP600 Series
Products *CP601*-A* *CP601*-B* *CP601*-C*
Circuit method Potentiometer circuit
Total resistance (1-C) 5kohm,   10kohm,   50kohm,   100kohm
Total resistance tolerance ±20%
Taper tolerance (150 degs) 10 - 25% 40 - 60% 10 - 25%
Residual resistance
 
Terminal 2 to C : 1% or 100ohm
Terminal 1 to 2 : 1%
Terminal 1 to 2 : 1% or 100ohm
Terminal 2 to C : 1% or 100ohm
Terminal 1 to 2 : 1% or 100ohm
Terminal 2 to C : 1%
Matching accuracy (150 degs) 3dB Max.
Voltage proof 1 Min. at AC500V
Insulation resistance 50Mohm or more at DC500V
Max rating 0.1W (Taper-B),  0.05W (Other taper)
Maximum input voltage DC30V or less
Sliding noise level 47mV or less (by JIS C 6443)
Sliding life 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical specifications CP600 Series
Operating angle 300 degrees ±5 degrees
Rotational torque 0.1 to 1.2Ncm (Different by number of circuit)
Strength Nut-Attached 50Ncm
Attached parts Hexagonal nut (M8)
Stopper strength 50Ncm
Push-pull strength 50N

General specifications CP600 Series
Temperature range -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity 90%RH (No condensation)


Please check before use.
* Solder heat resistance: 350deg C max, 5sec max, 2 times. (Manual soldering only)
* Special order of the shaft length is possible. Please contact us for details.
* It is highly recommended that the fault tolerant system is to be set up in the big situation like the live broadcast.
* Replacing it from other brands tests it enough, and please consider.
* Terminal numbers are '1', '2', and 'C', not '3', '2', and '1'.


Outline
CP601 2CP601 3CP601 4CP601
5CP601 6CP601        

Terminations

Output law (Taper-A / Taper-B / Taper-C)


Model number
2 CP601 S - B 10K
*1 *2 *3   *4 *5


*1
 
Number of circuits
 
Blank : Single circuit
2 to 6  : Number of circuits specified
*2 Product number CP601 : CP601 Series
*3

 
Mechanical click option

 
Blank : Without click
S         : With click (15degrees step)
C         : Center click
*4

 
Output law (Taper)

 
B : Taper-B
A : Taper-A
C : Taper-C
*5


 
Total resistance


 
5K     : 5kohm
10K   : 10kohm
50K   : 50kohm
100K : 100kohm


    Model Number Search 

  • CP601-B5K      *
    (Single circuit, Without click, Taper-B, Resistance 5kohm)
  • CP601-B10K      *
    (Single circuit, Without click, Taper-B, Resistance 10kohm)
  • CP601-B50K      *
    (Single circuit, Without click, Taper-B, Resistance 50kohm)
  • CP601-B100K      *
    (Single circuit, Without click, Taper-B, Resistance 100kohm)
  • CP601S-B5K      *
    (Single circuit, With click, Taper-B, Resistance 5kohm)
  • CP601S-B10K      *
    (Single circuit, With click, Taper-B, Resistance 10kohm)
  • CP601S-B50K      *
    (Single circuit, With click, Taper-B, Resistance 50kohm)
  • CP601S-B100K      *
    (Single circuit, With click, Taper-B, Resistance 100kohm)
  • CP601C-B5K
    (Single circuit, Center click, Taper-B, Resistance 5kohm)
  • CP601C-B10K
    (Single circuit, Center click, Taper-B, Resistance 10kohm)
  • CP601C-B50K
    (Single circuit, Center click, Taper-B, Resistance 50kohm)
  • CP601C-B100K
    (Single circuit, Center click, Taper-B, Resistance 100kohm)
  • CP601-A5K      *
    (Single circuit, Without click, Taper-A, Resistance 5kohm)
  • CP601-A10K      *
    (Single circuit, Without click, Taper-A, Resistance 10kohm)
  • CP601-A50K      *
    (Single circuit, Without click, Taper-A, Resistance 50kohm)
  • CP601-A100K      *
    (Single circuit, Without click, Taper-A, Resistance 100kohm)
  • CP601S-A5K      *
    (Single circuit, With click, Taper-A, Resistance 5kohm)
  • CP601S-A10K      *
    (Single circuit, With click, Taper-A, Resistance 10kohm)
  • CP601S-A50K      *
    (Single circuit, With click, Taper-A, Resistance 50kohm)
  • CP601S-A100K      *
    (Single circuit, With click, Taper-A, Resistance 100kohm)
  • CP601C-A5K
    (Single circuit, Center click, Taper-A, Resistance 5kohm)
  • CP601C-A10K
    (Single circuit, Center click, Taper-A, Resistance 10kohm)
  • CP601C-A50K
    (Single circuit, Center click, Taper-A, Resistance 50kohm)
  • CP601C-A100K
    (Single circuit, Center click, Taper-A, Resistance 100kohm)
  • CP601-C5K      *
    (Single circuit, Without click, Taper-C, Resistance 5kohm)
  • CP601-C10K      *
    (Single circuit, Without click, Taper-C, Resistance 10kohm)
  • CP601-C50K      *
    (Single circuit, Without click, Taper-C, Resistance 50kohm)
  • CP601-C100K      *
    (Single circuit, Without click, Taper-C, Resistance 100kohm)
  • CP601S-C5K      *
    (Single circuit, With click, Taper-C, Resistance 5kohm)
  • CP601S-C10K      *
    (Single circuit, With click, Taper-C, Resistance 10kohm)
  • CP601S-C50K      *
    (Single circuit, With click, Taper-C, Resistance 50kohm)
  • CP601S-C100K      *
    (Single circuit, With click, Taper-C, Resistance 100kohm)
  • CP601C-C5K
    (Single circuit, Center click, Taper-C, Resistance 5kohm)
  • CP601C-C10K
    (Single circuit, Center click, Taper-C, Resistance 10kohm)
  • CP601C-C50K
    (Single circuit, Center click, Taper-C, Resistance 50kohm)
  • CP601C-C100K
    (Single circuit, Center click, Taper-C, Resistance 100kohm)
  (* is the standard model)
   After selecting each specification, the model number for ordering appears at the top.
   (If blank, there is no target model.)

   Number of circuits :   Put the number of circuits in after the search.
   (Blank for 1 circuit, number for 2 to 8 circuits.)


Custom model number
[ How to specify different output-law in multiple circuits ]
* The number in front of "CP601" is the total number of circuits.
* The first output-law specified in the beginning will be the knob side.
* Consecutive cases of the same output-law are combined into one. ( A10K / A10K >> 2-A10K )
* If the total resistance is different, specify it separately.
* Ladder: Please see Variable attenuator CP601 Series.


[Please refer to the following]
Example Number of circuits Output law types Circuit position Model number for this specification.
1
 
4 circuits
 
Taper-A 10kohm x2
Taper-B 10kohm x2
top (knob side)
bottom
4CP601 - 2-A10K / 2-B10K
 
2
 
3 circuits
 
Taper-B 10kohm x1
Taper-A 10kohm x2
top (knob side)
bottom
3CP601 - B10K / 2-A10K
 
3

 
3 circuits

 
Taper-B 10kohm x1
Taper-A 10kohm x1
Taper-B 10kohm x1
top (knob side)
center
bottom
3CP601 - B10K / A10K / B10K

 
4
 
4 circuits
 
Taper-A 10kohm x3
Taper-B 10kohm x1
top (knob side)
bottom
4CP601 - 3-10K / B10K
 
5
 
4 circuits
 
Taper-A 10kohm x2
Taper-A 5kohm x2
top (knob side)
bottom
4CP601 - 2-A10K / 2-A5K
 
6
 
3 circuits
 
Ladder 10kohm x2
Taper-B 10kohm x1
top (knob side)
bottom
4CP601 - 2-10K / B10K
 




Update list
   
2024.03.18. Introduction of model number search.
2023.12.19. Addition of maximum input voltage specification.     Change in maximum ratings.
2023.03.24. Additional 3D data (step format).
2022.11.07. First edition