English   Japanese   
TOP         PRODUCTS         TECHNOLOGY         DISTRIBUTORS         PRODUCT STATUS
     MANUAL CONTROL FADER

CPA-9100 Series
Conductive plastic resistor element used (Low slide noise).
Best touch.
Horizontal style control-bar design (Protection against dust).
Durable system which adopted the shaft of the high quality.
3 types of output laws.
Last update: 2023.08.24. [Electrical-spec] [Mechanical-spec] [Note] [Dimensions] [Model-number] EU-RoHS


Information
Due to a delay in parts procurement, the color of the main body (label side) has been changed to gray.
This will not affect the use of the product.
If you cannot change the color, please contact our sales department.


Electrical specifications
(initial value)		 CPA-9100 Series
Products CPA-910*-B* 2CPA-910*-B* CPA-910*-* 2CPA-910*-* CPA-910*-AP* 2CPA-910*-AP*
Number of circuits
Type of output laws		 1
Linear taper		 2
Linear taper x2		 1
Audio taper		 2
Audio taper x2		 1
AP taper		 2
AP taper x2
Circuit method Potentiometer circuit Ladder circuit
Total resistance (1-C) 10kohm,   5kohm
Total resistance tolerance ±20%
Absolute linearity



 ±5%
 (The travel is divided into
 10 sections and 11 positions
 are measured.)		 -
Residual voltage (1-2), (2-3) 10mV or less -
Residual resistance (1-2), (2-3) 30ohm or less -
Attenuation accuracy
[Load: high]		 - 0 - 20dB: ±1.0dB (10dB: ±0.5dB)
   - 40dB: ±2.0dB
Matching accuracy

 		 - - 0 - 15dB: 0.5dB
   - 30dB: 1.0dB
   - 40dB: 2.0dB
 - 0 - 15dB: 0.5dB
   - 30dB: 1.0dB
   - 40dB: 2.0dB
Insertion loss - 0.5dB or less   (Audio taper,   AP taper)
Cut off [15kHz] - 100dB Min.   (Audio taper,   AP taper)
Voltage proof 1 Min. at AC500V
Insulation resistance 50Mohm or more at DC500V
Max rating DC20V (0.1W)
Rated Resistive Load - Switch AC125V 3A, DC30V 2A (OMRON D2F-F)
Sliding noise level 47mV or less (by JIS C 6443)
Sliding life 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical specifications
(initial value)		 CPA-9100 Series
Travel (Stroke) length 100mm ±0.5mm
Operating force
 		 0.1 to 0.25N (Standard)
0.2 to 0.4N (High operating force / Center click)
Strength Nut-Attached 100Ncm
Attached parts M3 screw (Length: Panel thickness + 3mm)
Stopper strength 50N
Push-pull strangth 40N
Alignment to the center ±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General specifications CPA-9100 Series
Temperature range -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity 90%RH (No condensation)

Note
* Solder heat resistance: 350deg C max, 5sec max, 2 times. (Manual soldering only)
* Please take care during soldering that the smoke from the solder does not flow inside a fader.
* If the flux sticks to a resistor board, it may cause a trouble with the fader.
* Move to one end in Control-bar on the occasion of knob wearing, and can break into it slowly.
* It is highly recommended that the fault tolerant system is to be set up in the big situation like the live broadcast.
* This product is designed on the assumption of the horizontal use.
* The enough operational testing is highly recommended for the slant or the vertical use to prevent the unexpected operation.
* Only high operating force type with CP-1 or CP2 is applicable for the vertical use.
* Replacing it from other brands tests it enough, and please consider.
* Caution in Ladder circuit(Audio and AP taper) use.

   Important points in using audio curve and log curve of TKD faders >>
* Color may vary slightly due to body material.
* Due to the way the body is processed, there may be some rubbing on the folded parts.
* A simple resistor maintenance procedure is presented. Please try it when you need it.
  However, we do not guarantee the product after this work.
* Please provide your own equipment.

    >>  1st step ,  2nd step ,  3rd step

Dimensions - CPA-910*-**
CPA-9101 CPA-9101W
2CPA-9101 2CPA-9101W
CPA-9102 CPA-9102W
2CPA-9102 2CPA-9102W

Dimensions - Panel cut out

Dimensions - Terminations


Model number
2 CPA-910 1 C W - C - B 10K
*1 *2 *3 *4 *5   *6   *7 *8


*1
 		 Number of circuits
 		 Blank : Single circuit
2         : Two circuits
*2 Product number (Travel) CPA-910 : CPA-9100 Series 100mm
*3
 		 Control-bar length: Length (Bracket height)
 		 1 : 9mm (5mm)
2 : 11mm (7mm)
*4
 		 Operating force
 		 Blank : Standard
C        : High operating force
*5
 		 Precision Snap Action Switch
(Center click is not selectable.)		 Blank : Without
W        : With
*6
 		 Click option
 		 Blank : Without
C        : Center click (Linear taper only)
*7

 		 Output law

 		 B        : Linear taper
Blank : Audio taper
AP      : AP taper
*8
 		 Total resistance
 		 10K : 10kohm
5K   : 5kohm


Products No.
( X: Standerd model)		 Travel Output law Resistance Operating
force		 Snap action
switch		 Center
click		 Control-bar length
(Bracket height)
CPA-9101-B10K X 100mm Linear 10kohm Standard Without Without 9mm (5mm)
CPA-9101-B5K   100mm Linear 5kohm Standard Without Without 9mm (5mm)
2CPA-9101-B10K X 100mm Linear x2 10kohm Standard Without Without 9mm (5mm)
2CPA-9101-B5K   100mm Linear x2 5kohm Standard Without Without 9mm (5mm)
CPA-9102-B10K X 100mm Linear 10kohm Standard Without Without 11mm (7mm)
CPA-9102-B5K   100mm Linear 5kohm Standard Without Without 11mm (7mm)
2CPA-9102-B10K X 100mm Linear x2 10kohm Standard Without Without 11mm (7mm)
2CPA-9102-B5K   100mm Linear x2 5kohm Standard Without Without 11mm (7mm)
CPA-9101C-B10K   100mm Linear 10kohm High Without Without 9mm (5mm)
CPA-9101C-B5K   100mm Linear 5kohm High Without Without 9mm (5mm)
2CPA-9101C-B10K   100mm Linear x2 10kohm High Without Without 9mm (5mm)
2CPA-9101C-B5K   100mm Linear x2 5kohm High Without Without 9mm (5mm)
CPA-9102C-B10K   100mm Linear 10kohm High Without Without 11mm (7mm)
CPA-9102C-B5K   100mm Linear 5kohm High Without Without 11mm (7mm)
2CPA-9102C-B10K   100mm Linear x2 10kohm High Without Without 11mm (7mm)
2CPA-9102C-B5K   100mm Linear x2 5kohm High Without Without 11mm (7mm)
CPA-9101W-B10K   100mm Linear 10kohm Standard With Without 9mm (5mm)
CPA-9101W-B5K   100mm Linear 5kohm Standard With Without 9mm (5mm)
2CPA-9101W-B10K   100mm Linear x2 10kohm Standard With Without 9mm (5mm)
2CPA-9101W-B5K   100mm Linear x2 5kohm Standard With Without 9mm (5mm)
CPA-9102W-B10K   100mm Linear 10kohm Standard With Without 11mm (7mm)
CPA-9102W-B5K   100mm Linear 5kohm Standard With Without 11mm (7mm)
2CPA-9102W-B10K   100mm Linear x2 10kohm Standard With Without 11mm (7mm)
2CPA-9102W-B5K   100mm Linear x2 5kohm Standard With Without 11mm (7mm)
CPA-9101CW-B10K   100mm Linear 10kohm High With Without 9mm (5mm)
CPA-9101CW-B5K   100mm Linear 5kohm High With Without 9mm (5mm)
2CPA-9101CW-B10K   100mm Linear x2 10kohm High With Without 9mm (5mm)
2CPA-9101CW-B5K   100mm Linear x2 5kohm High With Without 9mm (5mm)
CPA-9102CW-B10K   100mm Linear 10kohm High With Without 11mm (7mm)
CPA-9102CW-B5K   100mm Linear 5kohm High With Without 11mm (7mm)
2CPA-9102CW-B10K   100mm Linear x2 10kohm High With Without 11mm (7mm)
2CPA-9102CW-B5K   100mm Linear x2 5kohm High With Without 11mm (7mm)
CPA-9101-C-B10K   100mm Linear 10kohm Standard Without With 9mm (5mm)
CPA-9101-C-B5K   100mm Linear 5kohm Standard Without With 9mm (5mm)
2CPA-9101-C-B10K   100mm Linear x2 10kohm Standard Without With 9mm (5mm)
2CPA-9101-C-B5K   100mm Linear x2 5kohm Standard Without With 9mm (5mm)
CPA-9102-C-B10K   100mm Linear 10kohm Standard Without With 11mm (7mm)
CPA-9102-C-B5K   100mm Linear 5kohm Standard Without With 11mm (7mm)
2CPA-9102-C-B10K   100mm Linear x2 10kohm Standard Without With 11mm (7mm)
2CPA-9102-C-B5K   100mm Linear x2 5kohm Standard Without With 11mm (7mm)
CPA-9101-10K X 100mm Audio 10kohm Standard Without Without 9mm (5mm)
CPA-9101-5K   100mm Audio 5kohm Standard Without Without 9mm (5mm)
2CPA-9101-10K X 100mm Audio x2 10kohm Standard Without Without 9mm (5mm)
2CPA-9101-5K   100mm Audio x2 5kohm Standard Without Without 9mm (5mm)
CPA-9102-10K X 100mm Audio 10kohm Standard Without Without 11mm (7mm)
CPA-9102-5K   100mm Audio 5kohm Standard Without Without 11mm (7mm)
2CPA-9102-10K X 100mm Audio x2 10kohm Standard Without Without 11mm (7mm)
2CPA-9102-5K   100mm Audio x2 5kohm Standard Without Without 11mm (7mm)
CPA-9101C-10K   100mm Audio 10kohm High Without Without 9mm (5mm)
CPA-9101C-5K   100mm Audio 5kohm High Without Without 9mm (5mm)
2CPA-9101C-10K   100mm Audio x2 10kohm High Without Without 9mm (5mm)
2CPA-9101C-5K   100mm Audio x2 5kohm High Without Without 9mm (5mm)
CPA-9102C-10K   100mm Audio 10kohm High Without Without 11mm (7mm)
CPA-9102C-5K   100mm Audio 5kohm High Without Without 11mm (7mm)
2CPA-9102C-10K   100mm Audio x2 10kohm High Without Without 11mm (7mm)
2CPA-9102C-5K   100mm Audio x2 5kohm High Without Without 11mm (7mm)
CPA-9101W-10K   100mm Audio 10kohm Standard With Without 9mm (5mm)
CPA-9101W-5K   100mm Audio 5kohm Standard With Without 9mm (5mm)
2CPA-9101W-10K   100mm Audio x2 10kohm Standard With Without 9mm (5mm)
2CPA-9101W-5K   100mm Audio x2 5kohm Standard With Without 9mm (5mm)
CPA-9102W-10K   100mm Audio 10kohm Standard With Without 11mm (7mm)
CPA-9102W-5K   100mm Audio 5kohm Standard With Without 11mm (7mm)
2CPA-9102W-10K   100mm Audio x2 10kohm Standard With Without 11mm (7mm)
2CPA-9102W-5K   100mm Audio x2 5kohm Standard With Without 11mm (7mm)
CPA-9101CW-10K   100mm Audio 10kohm High With Without 9mm (5mm)
CPA-9101CW-5K   100mm Audio 5kohm High With Without 9mm (5mm)
2CPA-9101CW-10K   100mm Audio x2 10kohm High With Without 9mm (5mm)
2CPA-9101CW-5K   100mm Audio x2 5kohm High With Without 9mm (5mm)
CPA-9102CW-10K   100mm Audio 10kohm High With Without 11mm (7mm)
CPA-9102CW-5K   100mm Audio 5kohm High With Without 11mm (7mm)
2CPA-9102CW-10K   100mm Audio x2 10kohm High With Without 11mm (7mm)
2CPA-9102CW-5K   100mm Audio x2 5kohm High With Without 11mm (7mm)
CPA-9101-AP10K   100mm AP 10kohm Standard Without Without 9mm (5mm)
CPA-9101-AP5K   100mm AP 5kohm Standard Without Without 9mm (5mm)
2CPA-9101-AP10K   100mm AP x2 10kohm Standard Without Without 9mm (5mm)
2CPA-9101-AP5K   100mm AP x2 5kohm Standard Without Without 9mm (5mm)
CPA-9102-AP10K   100mm AP 10kohm Standard Without Without 11mm (7mm)
CPA-9102-AP5K   100mm AP 5kohm Standard Without Without 11mm (7mm)
2CPA-9102-AP10K   100mm AP x2 10kohm Standard Without Without 11mm (7mm)
2CPA-9102-AP5K   100mm AP x2 5kohm Standard Without Without 11mm (7mm)
CPA-9101C-AP10K   100mm AP 10kohm High Without Without 9mm (5mm)
CPA-9101C-AP5K   100mm AP 5kohm High Without Without 9mm (5mm)
2CPA-9101C-AP10K   100mm AP x2 10kohm High Without Without 9mm (5mm)
2CPA-9101C-AP5K   100mm AP x2 5kohm High Without Without 9mm (5mm)
CPA-9102C-AP10K   100mm AP 10kohm High Without Without 11mm (7mm)
CPA-9102C-AP5K   100mm AP 5kohm High Without Without 11mm (7mm)
2CPA-9102C-AP10K   100mm AP x2 10kohm High Without Without 11mm (7mm)
2CPA-9102C-AP5K   100mm AP x2 5kohm High Without Without 11mm (7mm)
CPA-9101W-AP10K   100mm AP 10kohm Standard With Without 9mm (5mm)
CPA-9101W-AP5K   100mm AP 5kohm Standard With Without 9mm (5mm)
2CPA-9101W-AP10K   100mm AP x2 10kohm Standard With Without 9mm (5mm)
2CPA-9101W-AP5K   100mm AP x2 5kohm Standard With Without 9mm (5mm)
CPA-9102W-AP10K   100mm AP 10kohm Standard With Without 11mm (7mm)
CPA-9102W-AP5K   100mm AP 5kohm Standard With Without 11mm (7mm)
2CPA-9102W-AP10K   100mm AP x2 10kohm Standard With Without 11mm (7mm)
2CPA-9102W-AP5K   100mm AP x2 5kohm Standard With Without 11mm (7mm)
CPA-9101CW-AP10K   100mm AP 10kohm High With Without 9mm (5mm)
CPA-9101CW-AP5K   100mm AP 5kohm High With Without 9mm (5mm)
2CPA-9101CW-AP10K   100mm AP x2 10kohm High With Without 9mm (5mm)
2CPA-9101CW-AP5K   100mm AP x2 5kohm High With Without 9mm (5mm)
CPA-9102CW-AP10K   100mm AP 10kohm High With Without 11mm (7mm)
CPA-9102CW-AP5K   100mm AP 5kohm High With Without 11mm (7mm)
2CPA-9102CW-AP10K   100mm AP x2 10kohm High With Without 11mm (7mm)
2CPA-9102CW-AP5K   100mm AP x2 5kohm High With Without 11mm (7mm)




Update list
2023.08.24. Add maintenance information.
2023.08.04. Added note on body material.
2023.07.20. Slight correction of specification notations.   Specification 4-40UNC screw deleted.
2023.03.29. Additional 3D data (step format).
2022.11.01. First edition